AK Interactive - Magnet Ultra Resistant Cyanocrylate Glue 20g
General-purpose cyanoacrylate 401. Fast drying - extra strong - low viscosity - specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber - leather - wood - metal - resin and plastic. The surfaces to be joined must be free of dirt - dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
More Images
AK Interactive - Magnet Ultra Resistant Cyanocrylate Glue 20g
General-purpose cyanoacrylate 401. Fast drying - extra strong - low viscosity - specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber - leather - wood - metal - resin and plastic. The surfaces to be joined must be free of dirt - dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
General-purpose cyanoacrylate 401. Fast drying - extra strong - low viscosity - specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber - leather - wood - metal - resin and plastic. The surfaces to be joined must be free of dirt - dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
